All On-Line orders will be shipped as normal!

VRC9020 VRC Torque-S FID Racing Dragon Hammer, Set

VRC9020 VRC Torque-S FID Racing Dragon Hammer, Set

Be the first to review this product

VRC FID Racing Dragon Hammer
VRC9020
8719697082343

Availability: Product is in stock

Regular Price: €194.90

Special Price: €189.90

Earn 1890 TPS Points
OR

Payment Methods

Information

Details

VRC Torque-S FID Racing Dragon Hammer

This VRC exhaust fits the FID Racing Dragon Hammer models with engines from 26 to 32 cc.

VRC, Victory RC, exhausts guarantee a considerable power gain in the whole RPM. In general, the power of a standard engine is increased by more than one horsepower, and the low end torque by more than 1 Newton meter.

Each pipe is made from thin sheet metal and welded and assembled entirely by hand. This VRC exhaust has an internal noise reducer and consists of several chambers for maximum performance. The very pleasant Race Sound and its volume can be compared to that of a Tuned scooter.

Mounting tip; Slide the rubber hose over the pipe and mount the manifold and spring. Then mount the assembly hand-tight on the cylinder. If you know for sure that it is in the right place on the car, fix the pipe and mount the cable ties. We recomend to use the TPS6403/32 clambs.

It often seems that the exhaust does not fit, but this is not the case. In the beginning there was a tight fit between the pipe and manifold, but due vibrations the cylinder that was fixed with 2 bolts, and/or the exhaust started to tear. Since a few years, that fit has been made wider to prevent this. But this does mean that the exhaust can move more, this also benefits the assembly on the car. Due to the strong spring the exhaust pulls in one direction, so it seems that the exhaust does not fit.

Suitable for:

  • FID Racing Dragon Hammer
  • FID Racing Dragon Hammer V2
Specifications

Additional Information

Description

VRC Torque-S FID Racing Dragon Hammer

This VRC exhaust fits the FID Racing Dragon Hammer models with engines from 26 to 32 cc.

VRC, Victory RC, exhausts guarantee a considerable power gain in the whole RPM. In general, the power of a standard engine is increased by more than one horsepower, and the low end torque by more than 1 Newton meter.

Each pipe is made from thin sheet metal and welded and assembled entirely by hand. This VRC exhaust has an internal noise reducer and consists of several chambers for maximum performance. The very pleasant Race Sound and its volume can be compared to that of a Tuned scooter.

Mounting tip; Slide the rubber hose over the pipe and mount the manifold and spring. Then mount the assembly hand-tight on the cylinder. If you know for sure that it is in the right place on the car, fix the pipe and mount the cable ties. We recomend to use the TPS6403/32 clambs.

It often seems that the exhaust does not fit, but this is not the case. In the beginning there was a tight fit between the pipe and manifold, but due vibrations the cylinder that was fixed with 2 bolts, and/or the exhaust started to tear. Since a few years, that fit has been made wider to prevent this. But this does mean that the exhaust can move more, this also benefits the assembly on the car. Due to the strong spring the exhaust pulls in one direction, so it seems that the exhaust does not fit.

Suitable for:

  • FID Racing Dragon Hammer
  • FID Racing Dragon Hammer V2
Weight gram 500.0000
Product Brand Victory RC
Product codeVRC9020
Reviews